1994-2004 Chevrolet / GMC S-10 / Sonoma 2nd Gen — subwoofer box fitment

What we researched for this specific generation: where an enclosure actually fits, what the factory speakers are, how the factory audio is wired, and which real builds and commercial products exist for it. Confidence badges say how well each figure is sourced — this is research, not manufacturer spec.

Body styles covered: Regular Cab, Extended Cab, Crew Cab (2001-2004)

Where a box actually fits

These are researched envelopes, not a guarantee. Measure your own vehicle — the numbers here tell you what to expect, not what you have.

Regular Cab Unconfirmed

Locationbehind the seat
Outer bounding boxPublished box footprints are lower bounds on the cavity, not the cavity: NET Audio 1995-2003 Standard Cab 49 x 8 x 18 in (as printed; axes not labelled), 2 ft3, 6 in mounting depth for 10s.
Known obstructionsJack and mounting studs (NET Audio).

Extended Cab Likely

Locationbehind the rear seat, on the floor
Outer bounding boxPublished box footprints are lower bounds on the cavity, not the cavity: NET Audio S10 Extended Cab downfire 39.75 x 13.5 x 13.5 in (as printed; axes not labelled), 2.18 ft3, 9.5 in mounting depth; Zenclosures S10 Extended Cab dual prints 0.80 ft3 per sub and 9 in mounting depth, no outside dimensions.
Known obstructionsThe box takes the place of the rear/jump seats (NET Audio, Zenclosures).

Door speaker fitment

Sizes and depths below are what research turned up for this generation. Confirm against your own vehicle before cutting or ordering — trim levels vary.

Front doors Unconfirmed

Factory speaker sizeno GM or Metra source gives the door speaker size for these years
Adapter bracket neededunconfirmed

Rear doors Unconfirmed

Adapter bracket neededunconfirmed

Factory audio integration

Factory amp / premium audiono maker brochure for these model years was reachable

Known integration products

Mounting locations

Regular Cab Likely

NET Audio sealed and ported boxes, Sound Off Audio pair of 8/10 in subs. Jack and mounting studs must be removed (NET Audio). No maker or EPA cargo figure for a pickup.

Extended Cab Likely

NET Audio: "This downfire box replaces the rear seats."; Zenclosures: "You Lose the use of the jump seats".

Builds and products found for this vehicle

Outside links. Some are commercial products, some are owner builds posted on forums — the label says which. We do not endorse any of them.

Build it for this vehicle

Each link opens the tool with this vehicle already selected.

Before you cut anything

Measure your own vehicle. Trim levels, factory subwoofer options, and mid-generation changes all move these numbers, and a box cut to a researched figure that does not match your truck is wasted wood. Where a badge reads Unconfirmed, treat the value as a starting point for your own measurement, not as an answer.