2006-2010 Dodge Charger Subwoofer Box Fitment

2006-2010 Dodge Charger LX (1st Gen of the revived Charger) — subwoofer box fitment

What we researched for this specific generation: where an enclosure actually fits, what the factory speakers are, how the factory audio is wired, and which real builds and commercial products exist for it. Confidence badges say how well each figure is sourced — this is research, not manufacturer spec.

Body styles covered: 4-Door Sedan

Where a box actually fits

These are researched envelopes, not a guarantee. Measure your own vehicle — the numbers here tell you what to expect, not what you have.

Trunk Likely

Location	trunk, below the rear deck
Outer bounding box	No independently measured trunk dimensions found. Largest sourced vehicle-specific products (outside sizes as printed by each maker, axes not labelled except where noted): NET Audio 25 x 32 x 15 in (4.0 and 4.7 cu ft); Ground Shaker dual box height 14 1/4, length 38 3/4, top depth 10 1/4, bottom depth 16 1/2 in (3.24 cu ft).
Known obstructions	NET Audio notes the small boxes work around the battery location, spare tire and trunk-floor humps on the rear sidewalls; Ground Shaker says its dual box does not block the spare tire compartment.

Door speaker fitment

Sizes and depths below are what research turned up for this generation. Confirm against your own vehicle before cutting or ordering — trim levels vary.

Front doors Unconfirmed

Factory speaker size	no maker or Metra source read for door speaker size or location
Adapter bracket needed	unconfirmed

Rear doors Unconfirmed

Adapter bracket needed	unconfirmed

Factory audio integration

Factory amp / premium audio	Dodge sheets. 2007 (columns SE, SXT, R/T RWD, R/T AWD): "Boston Acoustics six-speaker audio system with 276-watt digital (DSP) amplifier" (package on the first column, standard on the other three); "Boston Acoustics seven-speaker audio system with 322-watt digital (DSP) amplifier with subwoofer" optional on the two R/T columns. 2009 and 2010 (columns SE, SXT RWD, SXT AWD, R/T RWD, R/T AWD): four-speaker system standard on SE and SXT; "Six Boston Acoustics speakers with 276-watt digital (DSP) amplifier" package on SXT, standard on R/T; "Boston Acoustics eight-speaker 368-watt Digital Signal Processing (DSP) amp with 5.1 Matrix surround sound" package on R/T. The 2010 document's own "What's New" text calls it "an eight-speaker, 5.1 Matrix surround-sound amplifier including subwoofer" (extracted text, two columns interleaved). Speaker sizes, subwoofer size and location not published.
Adding subs without a head-unit swap	Boston Acoustics systems have a DSP amplifier; nothing read on tapping it

Factory amp / premium audio

Dodge sheets. 2007 (columns SE, SXT, R/T RWD, R/T AWD): "Boston Acoustics six-speaker audio system with 276-watt digital (DSP) amplifier" (package on the first column, standard on the other three); "Boston Acoustics seven-speaker audio system with 322-watt digital (DSP) amplifier with subwoofer" optional on the two R/T columns. 2009 and 2010 (columns SE, SXT RWD, SXT AWD, R/T RWD, R/T AWD): four-speaker system standard on SE and SXT; "Six Boston Acoustics speakers with 276-watt digital (DSP) amplifier" package on SXT, standard on R/T; "Boston Acoustics eight-speaker 368-watt Digital Signal Processing (DSP) amp with 5.1 Matrix surround sound" package on R/T. The 2010 document's own "What's New" text calls it "an eight-speaker, 5.1 Matrix surround-sound amplifier including subwoofer" (extracted text, two columns interleaved). Speaker sizes, subwoofer size and location not published.

Adding subs without a head-unit swap

Boston Acoustics systems have a DSP amplifier; nothing read on tapping it

Known integration products

no vehicle-specific line-output converter or amp interface found

Mounting locations

Trunk Unconfirmed

trunk
behind the rear seat (enclosure makers: slides in through the trunk opening below the rear deck)

Dodge, SAE cargo volume 16.2 cu ft on the 2006, 2007, 2009 and 2010 sheets; trunk lift-over height 30.1 in. A luggage rating, not a box volume. Trunk width and depth were not published by Dodge; vehicle-specific enclosures for this car are listed with the builds and products below, with their stated outside sizes.

Builds and products found for this vehicle

Outside links. Some are commercial products, some are owner builds posted on forums — the label says which. We do not endorse any of them.

NET Audio (ported) off-the-shelf
NET Audio "2006-2023 Dodge Charger Sub Box Large Ported". NET states fit years 2006-2023. Published outside dimensions: 25 x 32 x 15 in (as printed; axes not labelled). Published volume: 4.0 cu ft. Mounting depth 12 in. Trunk; keeps access to the battery and fuse box; 1 to 3 subs of 8, 10 or 12 in; tuned around 34-37 Hz.
NET Audio (sealed) off-the-shelf
NET Audio "2006-2023 Dodge Charger Sub Box Large Sealed". Fit years 2006-2023. 25 x 32 x 15 in (as printed; axes not labelled). 4.0 cu ft. Mounting depth 12 in. Trunk; fits from the floor hinge toward the rear seat with room for an amplifier behind it; 1 to 3 subs of 8, 10 or 12 in.
NET Audio (ported) off-the-shelf
NET Audio "2006-2023 Dodge Charger Sub Box X-Large Ported". Fit years 2006-2023. 25 x 32 x 15 in (as printed; axes not labelled). 4.7 cu ft. Mounting depth 12 in. Trunk; amplifier has to go elsewhere, for example the spare tire well; tuned around 34-37 Hz.
NET Audio (ported) off-the-shelf
NET Audio "2006-2023 Dodge Charger Sub Box Medium Ported". Fit years 2006-2023. 31 x 12 x 14 in (as printed; axes not labelled). 2.0 cu ft. Mounting depth 10 in. Trunk; NET says the box is "only 8" deep at the bottom"; 1 x 12, 2 x 10 or 3 x 8.
NET Audio (sealed) off-the-shelf
NET Audio "2006-2023 Dodge Charger Sub Box Medium Sealed". Fit years 2006-2023. 31 x 12 x 14 in (as printed; axes not labelled). 2.0 cu ft. Mounting depth 10 in. Trunk; three 8, two 10 or two 12 in subs.
NET Audio (ported) off-the-shelf
NET Audio "2006-2023 Dodge Charger Sub Box Small Ported". Fit years 2006-2023. 31 x 8 x 14 in (as printed; axes not labelled). 1.2 cu ft. Mounting depth 6 in. Trunk; works around the battery location and spare tire and the trunk-floor humps on the rear sidewalls; one 8 or 10 in sub.

Show 8 more

NET Audio (sealed) off-the-shelf
NET Audio "2006-2023 Dodge Charger Sub Box Small Sealed". Fit years 2006-2023. 31 x 8 x 14 in (as printed; axes not labelled). 1.2 cu ft. Mounting depth 6 in. Trunk; three 8, two 10 or one 12 in (as printed on the page).
Zenclosures (sealed) off-the-shelf
Zenclosures "2006-2010 Dodge Charger Subwoofer Enclosure". Zenclosures states fit years 2006-2010. Outside dimensions not printed. Volume 1.25 cu ft per chamber, 2.5 cu ft total. Mounting depth 10.00 in. Sealed. Installs "directly through the trunk opening and slides into place directly below the rear dash"; 1 x 10, 1 x 12, 2 x 10, 2 x 12, or one or two 15 in (round).
Zenclosures (sealed) off-the-shelf
Zenclosures "2006-2010 Dodge Charger Subwoofer Box with Recessed Mounting Surface". Fit years 2006-2010. Outside dimensions not printed. 1.23 cu ft per chamber (2.46 cu ft two chambers). Mounting depth 9.00 in. Sealed; 2 x 10, 2 x 12 or 1 x 12 centred; through the trunk opening, below the rear dash.
Zenclosures (sealed) off-the-shelf
Zenclosures "2005-2010 Dodge Charger FRONT FIRE Subwoofer Box". Zenclosures states fit years 2005-2010 (Dodge's own sheets give 2006 as this Charger's first model year). Outside dimensions not printed. "Volume per chamber - 1.23ft^3". Mounting depth 9.50 in. Sealed; 1 x 10, 1 x 12, 2 x 10 or 2 x 12; installed through the trunk opening.
Zenclosures (ported) off-the-shelf
Zenclosures "Dodge Charger 2005-2010 1-15" or 1-12" PORTED VENTED Subwoofer Box". Fit years 2005-2010. Outside dimensions not printed. 2.50 cu ft total (mono chamber). Mounting depth 10.00 in. Ported, tuned to 30 Hz; one 15 or one 12 in; installs through the trunk opening.
Ground Shaker (2 x 10", sealed) off-the-shelf
Ground Shaker black 10 in dual sealed sub box for the Charger (page title "FITS 06-26 DODGE CHARGER"; the product URL says 06-24). Outside dimensions as printed: height 14 1/4, length 38 3/4, top depth 10 1/4, bottom depth 16 1/2 in. Total 3.24 cu ft (1.62 per chamber). Mounting depth 10 in. Sealed. "Fits behind rear seat", rear firing, no modifications, does not block the spare tire compartment. 43 lb.
Ground Shaker (2 x 12", sealed) off-the-shelf
Ground Shaker black 12 in dual sealed sub box for the Charger (page title "FITS 06-26 DODGE CHARGER"). Same outside dimensions as the 10 in box: height 14 1/4, length 38 3/4, top depth 10 1/4, bottom depth 16 1/2 in. 3.24 cu ft total (1.62 per chamber). Mounting depth 10 in. Sealed. Behind the rear seat, no modifications. 43 lb.
Ground Shaker (2 x 10", ported) off-the-shelf
Ground Shaker black 10 in dual ported solobaric sub box for the Charger (page title "FITS 06-26 DODGE CHARGER"). Outside dimensions as printed: height 15, length 38, top depth 10 1/2, bottom depth 20 in. 3.20 cu ft total (1.60 per sub). Mounting depth 10 in. Ported, tuned to 32 Hz. Behind the rear seat, rear firing, no modifications, does not block the spare tire compartment. 59 lb.

Build it for this vehicle

Design a box for this vehicle — Enclosure volume, port tuning, and a cut sheet.
Door speaker fitment — No measured door depth on file for this vehicle yet, so there is no fit check to run. The page says how to request one.
See the factory speaker locations — Factory speaker sizes, depths and locations we have researched for this vehicle.

Each link opens the tool with this vehicle already selected.

Before you cut anything

Measure your own vehicle. Trim levels, factory subwoofer options, and mid-generation changes all move these numbers, and a box cut to a researched figure that does not match your truck is wasted wood. Where a badge reads Unconfirmed, treat the value as a starting point for your own measurement, not as an answer.