2019-2025 Ford Ranger 5th/6th Gen (US market return) — subwoofer box fitment

What we researched for this specific generation: where an enclosure actually fits, what the factory speakers are, how the factory audio is wired, and which real builds and commercial products exist for it. Confidence badges say how well each figure is sourced — this is research, not manufacturer spec.

Body styles covered: SuperCab, SuperCrew

Where a box actually fits

These are researched envelopes, not a guarantee. Measure your own vehicle — the numbers here tell you what to expect, not what you have.

Supercrew Likely

Locationunder passenger-side rear seat, SuperCrew only
Outer bounding boxConfirmed real factory storage bin location exists (JL Stealthbox replaces it directly) and real Goose Gear seat-delete product line exists for this generation — specific outer dimensions not found, inferred lower bound from the ProLine-X (1.3 ft3) and Skar (1000W-rated single 10") products already in this entry
Known obstructionsNone specifically documented
Usable volume estimate1.3 ft³

Starting points

Suggested configurations for this vehicle, not prescriptions. Run the numbers in the Box Builder before you buy anything.

Budget

Subwoofers1x10" sealed, up-firing
Box typesealed
Locationunder rear seat

Enthusiast

Subwoofers1x10" loaded, 1.3 ft3
Box typesealed
Locationunder rear seat, SuperCrew only

Door speaker fitment

Sizes and depths below are what research turned up for this generation. Confirm against your own vehicle before cutting or ordering — trim levels vary.

Front doors Solid

Factory speaker size2019-2023 (5th Gen): compatible with 6.5"/6.75" aftermarket, suggesting a similar factory size. 2024-2025 (6th Gen, new platform within this entry's year range): confirmed 6x9", with tweeters relocated to the pillars.
Known obstructionsReal generation split within this entry's range — don't assume 5th and 6th gen share the same door speaker size
Adapter bracket neededunconfirmed
TweeterA-pillar (2024-2025 6th Gen, B&O system only). 5th Gen (2019-2023) tweeter integration/location not independently confirmed.
Midrangen/a — door itself functions as the midbass driver on the component system, woofer handles lows/mids, tweeter takes over above ~3kHz

Rear doors Solid

Factory speaker size2019-2023: 6.75" (SuperCab and SuperCrew both). 2024-2025: 6.5".
Adapter bracket neededunconfirmed
Tweetern/a — tweeter (2024-2025 B&O) is front A-pillar only, not doubled to rear

Factory audio integration

Factory amp / premium audioB&O system confirmed on equipped trims with a factory ~6" driver behind the rear seats
Adding subs without a head-unit swapConfirmed straightforward — multiple direct-fit products exist for SuperCrew specifically
Head unitNo replacement needed

Known integration products

Mounting locations

Supercrew Solid

Real specific products: Skar Audio single 10" loaded, 1000W, seamless fit below rear seat, up-firing design (preserves cabin space). JL Audio Stealthbox: 10TW1-2, 300W, 2-ohm mono, installs under passenger-side rear seat in place of the factory storage compartment — EXPLICITLY WILL NOT FIT SuperCab, SuperCrew only. ProLine-X: 1.3 ft3, up to 1000W RMS, seat removal is 4 bolts / 25-30 min with basic tools. B&O-equipped trucks have a factory ~6" driver behind the rear seats.

Builds and products found for this vehicle

Outside links. Some are commercial products, some are owner builds posted on forums — the label says which. We do not endorse any of them.

Build it for this vehicle

Each link opens the tool with this vehicle already selected.

Before you cut anything

Measure your own vehicle. Trim levels, factory subwoofer options, and mid-generation changes all move these numbers, and a box cut to a researched figure that does not match your truck is wasted wood. Where a badge reads Unconfirmed, treat the value as a starting point for your own measurement, not as an answer.