2016-2024 Honda Ridgeline 2nd Gen — subwoofer box fitment

What we researched for this specific generation: where an enclosure actually fits, what the factory speakers are, how the factory audio is wired, and which real builds and commercial products exist for it. Confidence badges say how well each figure is sourced — this is research, not manufacturer spec.

Body styles covered: Crew Cab (unibody, only cab style offered)

Where a box actually fits

These are researched envelopes, not a guarantee. Measure your own vehicle — the numbers here tell you what to expect, not what you have.

Crew Cab Likely

Locationunderseat, full cab (real owner-measured, broader than just the factory sub location)
Outer bounding boxReal forum-measured: width between sills ~53.5" (narrows near the pillars), track-to-back-of-cab ~13", floor-to-seat-bottom ~9"
Known obstructionsWidth narrows near the B-pillars — the full 53.5" isn't usable edge-to-edge for a rectangular box
Usable volume estimate1.29 ft³

Starting points

Suggested configurations for this vehicle, not prescriptions. Run the numbers in the Box Builder before you buy anything.

Budget

Subwoofers1x8" factory-location upgrade, ~0.5-0.55 ft3
Box typesealed
Locationfactory subwoofer location

Enthusiast

Subwoofers1x10" sealed, 1.29 ft3
Box typesealed
Locationunderseat custom or ZEnclosures-style aftermarket

Door speaker fitment

Sizes and depths below are what research turned up for this generation. Confirm against your own vehicle before cutting or ordering — trim levels vary.

Front doors Solid

Factory speaker size6.5"
Known obstructionsNone specifically documented
Adapter bracket neededunconfirmed

Rear doors Solid

Factory speaker size6.5" (Crew Cab, same as front)
Known obstructionsNone specifically documented
Adapter bracket neededunconfirmed
Tweetern/a — tweeter (where equipped) is A-pillar mounted, front only

Factory audio integration

Factory amp / premium audioReal, but only confirmed for the tail end of this generation. 540W, 8-speaker premium system (with center channel, no third-party brand) confirmed on RTL-E and Black Edition trims for 2023-2024. 2016-2022 not independently confirmed — real possibility trim names or the spec itself differed earlier in this generation's long run.
Adding subs without a head-unit swapConfirmed straightforward via the factory subwoofer location upgrade path
Head unitNo replacement needed

Mounting locations

Crew Cab Likely

Unusual among trucks — Ridgeline is unibody (shares underpinnings with the Pilot), not body-on-frame. Real factory baseline: 7 3/16" cutout, only 3" of depth without modification, OEM enclosure holds ~16L (0.5-0.55 ft3) — adequate for most 8" subs but a real small starting point. Real aftermarket options: ZEnclosures sealed box, 6.50" mounting depth, adjustable 8"/10" holes, 1.29 ft3 total, 0.625" MDF; a downfire alternative fitting 2x8" or 1x10", 1.2 ft3, 5.25" mounting depth. Real DIY underseat build documented: 2x4-style frame construction, completed box 41.5"W x 8.5"H, housing a 10" sub.

Builds and products found for this vehicle

Outside links. Some are commercial products, some are owner builds posted on forums — the label says which. We do not endorse any of them.

Build it for this vehicle

Each link opens the tool with this vehicle already selected.

Before you cut anything

Measure your own vehicle. Trim levels, factory subwoofer options, and mid-generation changes all move these numbers, and a box cut to a researched figure that does not match your truck is wasted wood. Where a badge reads Unconfirmed, treat the value as a starting point for your own measurement, not as an answer.