2010-2015 Hyundai Tucson 2nd Gen (LM) — subwoofer box fitment

What we researched for this specific generation: where an enclosure actually fits, what the factory speakers are, how the factory audio is wired, and which real builds and commercial products exist for it. Confidence badges say how well each figure is sourced — this is research, not manufacturer spec.

Body styles covered: 4-Door Crossover

Where a box actually fits

These are researched envelopes, not a guarantee. Measure your own vehicle — the numbers here tell you what to expect, not what you have.

Standard Likely

Locationright rear side panel (factory location) or spare tire well
Outer bounding boxFactory box ~8.2L (~0.29 ft3); max mounting depth ~6"
Known obstructionsHard size ceiling — no room for a 10" driver in this generation's standard cargo location, unlike most SUVs
Usable volume estimate0.29 ft³

Starting points

Suggested configurations for this vehicle, not prescriptions. Run the numbers in the Box Builder before you buy anything.

Budget

Subwoofers1x8" factory-location upgrade, ~0.29-0.5 ft3
Box typesealed
Locationright rear side panel, factory location — max 8", max 6" depth

Enthusiast

Subwoofers1x8" or larger, spare-tire-well location (spare tire sacrificed)
Box typesealed
Locationspare tire well — only if giving up the spare

Door speaker fitment

Sizes and depths below are what research turned up for this generation. Confirm against your own vehicle before cutting or ordering — trim levels vary.

Front doors Solid

Factory speaker sizeunconfirmed exact size — real confirmed location is the front sail panel, not a traditional door mount; ~1-1/2" tweeter secured to the sail panel separately
Known obstructionsSpeaker location itself (sail panel vs. door) may differ from most other vehicles — verify before assuming a standard door swap
Adapter bracket neededunconfirmed
TweeterSail-panel-mounted (not dash, not A-pillar proper, not in the door itself) — real, confirmed ~1-1/2" tweeter secured to the sail panel separately from the main door/window speaker.

Rear doors Unconfirmed

Factory speaker sizeunconfirmed
Adapter bracket neededunconfirmed
Tweetern/a — tweeter is sail-panel mounted, front only

Factory audio integration

Factory amp / premium audio8" dual-voice-coil factory subwoofer confirmed on upgraded audio package trims, right rear side panel
Adding subs without a head-unit swapConfirmed straightforward via the factory location, but genuinely size-constrained — see the 6"/8" max hard limit above
Head unitNo replacement needed

Mounting locations

Standard Likely

Real cargo space: 40"W x 16"H x 23"/33"D. Factory subwoofer (upgraded audio package): 8" dual 2-ohm voice coil, right rear side panel, real measured factory box volume ~8.2L (~0.29 ft3) — a genuinely tiny factory enclosure. REAL HARD CONSTRAINT worth surfacing prominently: max mounting depth is only ~6", and max practical sub size is 8" — there is NOT enough room for a 10" driver in the standard cargo area on this generation. The spare tire well is flagged as a real alternative location, but only if the owner is willing to give up the spare tire entirely — a genuine tradeoff, not a free upgrade.

Builds and products found for this vehicle

Outside links. Some are commercial products, some are owner builds posted on forums — the label says which. We do not endorse any of them.

Build it for this vehicle

Each link opens the tool with this vehicle already selected.

Before you cut anything

Measure your own vehicle. Trim levels, factory subwoofer options, and mid-generation changes all move these numbers, and a box cut to a researched figure that does not match your truck is wasted wood. Where a badge reads Unconfirmed, treat the value as a starting point for your own measurement, not as an answer.