2016-2024 Nissan Altima 5th-6th Gen — subwoofer box fitment

What we researched for this specific generation: where an enclosure actually fits, what the factory speakers are, how the factory audio is wired, and which real builds and commercial products exist for it. Confidence badges say how well each figure is sourced — this is research, not manufacturer spec.

Body styles covered: 4-Door Sedan

Where a box actually fits

These are researched envelopes, not a guarantee. Measure your own vehicle — the numbers here tell you what to expect, not what you have.

Trunk Solid

Locationtrunk, through existing opening, seats up or down
Outer bounding box8.00" mounting depth
Known obstructionsNone specifically documented
Usable volume estimate1 ft³

Starting points

Suggested configurations for this vehicle, not prescriptions. Run the numbers in the Box Builder before you buy anything.

Budget

Subwoofers1x10" sealed, 1.00 ft3
Box typesealed
Locationtrunk

Enthusiast

Subwoofers1x12" sealed, 1.00 ft3
Box typesealed
Locationtrunk

Door speaker fitment

Sizes and depths below are what research turned up for this generation. Confirm against your own vehicle before cutting or ordering — trim levels vary.

Front doors Likely

Factory speaker size~6.5" (real adapter rings sold at 6.75"-to-6.5" confirm the factory mounting location)
Known obstructionsNone specifically documented
Adapter bracket neededyes

Rear doors Likely

Factory speaker size~6.5" (same as front)
Known obstructionsNone specifically documented
Adapter bracket neededyes
Tweetern/a — no confirmed rear tweeter

Factory audio integration

Factory amp / premium audioReal, partial — solid for the newest year, not the whole span. Bose confirmed real for this nameplate (Nissan's own marketing lists Altima among its Bose-equipped vehicles). Specific, current confirmation: 2024 model year has Bose on SL and SR VC-Turbo trims — notably NOT Platinum, a genuine exception to the usual 'top trim gets premium audio' pattern seen on other vehicles covered here. Bose was also available on 2016-2018 cars, but which trims for those earlier years wasn't independently confirmed.
Adding subs without a head-unit swapConfirmed straightforward — trunk-based builds don't touch the head unit
Head unitNo replacement needed

Mounting locations

Trunk Solid

Real specific spec: 8.00" mounting depth, 9.125"/11.125" cutouts (10"/12"), 1.00 ft3/chamber, sealed, 0.75" MDF. Installs through the existing trunk opening and works with seats either up or down — genuine flexibility note.

Builds and products found for this vehicle

Outside links. Some are commercial products, some are owner builds posted on forums — the label says which. We do not endorse any of them.

Build it for this vehicle

Each link opens the tool with this vehicle already selected.

Before you cut anything

Measure your own vehicle. Trim levels, factory subwoofer options, and mid-generation changes all move these numbers, and a box cut to a researched figure that does not match your truck is wasted wood. Where a badge reads Unconfirmed, treat the value as a starting point for your own measurement, not as an answer.