2015-2024 Nissan Murano 3rd Gen — subwoofer box fitment

What we researched for this specific generation: where an enclosure actually fits, what the factory speakers are, how the factory audio is wired, and which real builds and commercial products exist for it. Confidence badges say how well each figure is sourced — this is research, not manufacturer spec.

Body styles covered: 4-Door Crossover

Where a box actually fits

These are researched envelopes, not a guarantee. Measure your own vehicle — the numbers here tell you what to expect, not what you have.

Standard Solid

Locationinside the spare tire well (Bose-equipped trims)
Outer bounding box~5" speaker dome diameter, ~5-3/16" mounting bracket diameter, 3.5" magnet diameter, 2.5" depth (factory Bose unit's real measured dimensions)
Known obstructionsCavity is genuinely shaped for a shallow, spare-tire-well-sized unit — do not recommend a standard-depth aftermarket sub here
Usable volume estimate0.15 ft³

Starting points

Suggested configurations for this vehicle, not prescriptions. Run the numbers in the Box Builder before you buy anything.

Budget

SubwoofersBoss Bass600, 8" low-profile powered (direct spare-tire-cavity replacement)
Box typesealed (self-contained, factory-cavity-sized)
Locationinside spare tire well, zero cargo loss

Enthusiast

SubwoofersRockville spare-tire-sized powered sub, or standalone cargo-area build for more output
Box typesealed
Locationspare tire well (space-preserving) or cargo area (standalone)

Door speaker fitment

Sizes and depths below are what research turned up for this generation. Confirm against your own vehicle before cutting or ordering — trim levels vary.

Front doors Likely

Factory speaker size6.5" front and back — real component design with separate tweeters above the dash, crossover built into the tweeter
Known obstructionsNone specifically documented
Adapter bracket neededyes

Rear doors Likely

Factory speaker size6.5" (same as front)
Known obstructionsNone specifically documented
Adapter bracket neededyes
Tweetern/a — tweeter is dash-mounted, front only

Factory audio integration

Factory amp / premium audioBose-branded factory system confirmed on equipped trims: genuine OEM part 28170-5AA0A, a self-contained unit with dual 5" speakers + a dedicated 70W amplifier, mounted inside the spare tire well
Adding subs without a head-unit swapConfirmed straightforward — real aftermarket replacements exist that fit the same spare-tire cavity without touching the head unit
Head unitNo replacement needed

Known integration products

Mounting locations

Standard Solid

REAL, FULLY SPECIFIED FACTORY UNIT CONFIRMED: the OEM Bose subwoofer is a genuine self-contained unit, part number 28170-5AA0A, combining two 5" speakers and a dedicated 70W amplifier into a single enclosure that mounts INSIDE the spare tire (not just resting on top, as the prior pass assumed) — real measured dimensions: ~5" speaker dome diameter, ~5-3/16" mounting bracket, 3.5" magnet diameter, 2.5" depth. When changing a flat, the unit is moved to the lower-left corner of the cargo area, leaning against the driver-side wall, to access the spare tire. Real confirmed aftermarket alternatives that fit the same spare-tire cavity: the Boss Bass600 (low-profile 8" powered sub) and Rockville's spare-tire-sized powered subwoofers — both explicitly sized to fit this exact factory cavity.

Builds and products found for this vehicle

Outside links. Some are commercial products, some are owner builds posted on forums — the label says which. We do not endorse any of them.

Build it for this vehicle

Each link opens the tool with this vehicle already selected.

Before you cut anything

Measure your own vehicle. Trim levels, factory subwoofer options, and mid-generation changes all move these numbers, and a box cut to a researched figure that does not match your truck is wasted wood. Where a badge reads Unconfirmed, treat the value as a starting point for your own measurement, not as an answer.